Lexmark CX725
Note: An asterisk (*) next to a value indicates the factory default setting.
USB Configuration
Configure the USB settings.
Tray Configuration
Set the printer to detect the size of the paper loaded in the tray.
Note: This menu item appears only in trays with size‑sensing mechanism.
Set the printer to link the trays that have the same paper type and paper size settings.
Set the printer to display the Tray Insert message after the user has inserted a tray.
Specify the page orientation when loading A5 paper size.
Set the paper source that the user will fill when a prompt appears to load paper or envelope.
Note: For Multipurpose Feeder to appear, set Configure MP to Cassette from the Paper menu.
Set the printer to resolve paper- or envelope-related change prompts.
Reports
Print reports about printer menu settings, status, and event logs.
Supply Usage And Counters
Reset the supply page counter or view the total printed pages.
Note: These settings may vary depending on your printer model.
Scanner Configuration
Set the size of a border around the scanned image that will be erased.
Set the scanner registration after replacing the ADF, scanner glass, or controller board.
Determine the byte order of a TIFF‑formatted scan output.
Set the RowsPerStrip tag value of a TIFF‑formatted scan output.
Printer Emulations
Set the printer to use the PPDS data stream.
Fax Configuration
Specify the power setting when in fax mode.
Specify the fax storage location.
Note: This setting appears only when a printer hard disk is installed.
Print Configuration
Print color content in grayscale.
Enhance the printed output to correct misregistration in the printer.
Adjust the value of the high frequency screens used for font data.
Adjust the toner density when printing or copying documents.
Reduce the amount of noise that the printer makes when printing.
Device Operations
Set the printer to show the control panel menus.
Set the printer to operate in a special mode, in which it attempts to continue offering as much functionality as possible, despite known issues.
Set the memory allocation for storing copy jobs.
Notes:
Erase all custom messages.
Show existing error messages on the display when the printer returns to an active state.
Set the printer to use the Orientation setting under Copy menu when sending quick copy jobs.
Set the printer to run its wipers and clean the sensing and laser optics.
Note: This setting is available only in some printer models.
Set the printer to put down the correct amount of toner to maintain color consistency.
Set the printer to detect the paper type being loaded.
Set supply levels.
Toner patch sensor setup
Run the full color calibration.
Print a diagnostic page that contains toner patch sensor calibration.
App Configuration
Enable the Lexmark Embedded Solutions (LES) applications.
Note: This setting does not affect built‑in applications.
Virtual Configuration Center (VCC) issues primary escalation KB
How to Export and Import User-Defined Configuration Settings on Most Lexmark Laser Printers and MFPs