Skip to Content Information Center
Lexmark CX725

Lexmark CX725

Not your product?

HVPS removal

Note:  For a video demonstration, see HVPS removal.

  1. Remove the transfer module. See Transfer module removal.

  2. Remove the controller board. See Controller board removal.

  3. Remove the retainer (A).

  4. Disconnect the cable (B).

  5. Remove the screw (C) securing the HVPS.

  6. Press the three toner contacts (D) from inside the printer, and then remove the power supply.

  7. Make sure that the transfer module guide rail does not block the three toner contacts.
  8. Make sure that the three toner contacts freely move and are fully extended.
  9. Make sure that the index pin (A) behind the transfer module retract arm is properly aligned.
Was this article helpful?


Related content

Top