Skip to Content Information Center
Lexmark CX725

Lexmark CX725

Not your product?

Left cover removal

Note:  When reinstalling the left cover, be careful to avoid damage to the output motor with the tab at the top of the cover. Also, avoid hitting the BOR retract motor with the round standoff on the inside of the cover.

  1. Remove the scanner rear left cover. See Scanner rear left cover removal.

  2. Remove the three screws (A) from the front of the cover.

  3. Remove the screw (B) from the lower‑left side of the cover.

  4. Remove the three screws (C) from the rear of the cover, and then remove the cover.
Was this article helpful?


Related content

Top