Skip to Content Information Center
Lexmark B3442

Lexmark B3442

IPSec

Note:  This menu appears only in network printers or printers that are attached to print servers.

Menu itemDescription

Note:  An asterisk (*) next to a value indicates the factory default setting.

    Enable IPSec

  • Off*
  • On

Enable Internet Protocol Security (IPSec).

    Base Configuration

  • Default*
  • Compatibility
  • Secure

Set the IPSec base configuration.

Note:  This menu item appears only when Enable IPSec is set to On.

    DH (Diffie‑Hellman) Group Proposal

  • modp2048 (14)*
  • modp3072 (15)
  • modp4069 (16)
  • modp6144 (17)

Set the IPSec encryption.

Notes:

  • DH (Diffie‑Hellman) Group Proposal appears only when Base Configuration is set to Compatibility.
  • IKE SA Lifetime (Hours) and IPSec SA Lifetime (Hours) appear only when Base Configuration is set to Secure.

    IKE SA Lifetime (Hours)

  • 1
  • 2
  • 4
  • 8
  • 24*

    IPSec SA Lifetime (Hours)

  • 1
  • 2
  • 4
  • 8*
  • 24

    Proposed Encryption Method

  • 3DES
  • AES*

Specify the encryption and authentication methods to connect to a network securely.

Note:  These menu items appear only when Base Configuration is set to Compatibility.

    Proposed Authentication Method

  • SHA1
  • SHA256*
  • SHA512

    IPSec Device Certificate

Specify an IPSec certificate.

Note:  This menu item appears only when Enable IPSec is set to On.

    Pre‑Shared Key Authenticated Connections

  • Host [x]
    • Address
    • Key

Configure the authenticated connections of the printer.

Note:  These menu items appear only when Enable IPSec is set to On.

    Certificate Authenticated Connections

  • Host [x] Address[/subnet]
    • Address[/subnet]
Was this article helpful?
Top