Open the front door.
Unlock the waste toner bottle.
Remove the waste toner bottle.
Note: To avoid spilling the toner, place the bottle in an upright position.
Unlock the used photoconductor unit.
Warning—Potential Damage: To avoid toner contamination, do not touch the end of the photoconductor unit.
Remove the used photoconductor unit.
Unpack the new photoconductor unit.
Warning—Potential Damage: Do not expose the photoconductor unit to direct light for more than one minute. Extended exposure to light may cause print quality problems.
Warning—Potential Damage: Do not touch the photoconductor drum. Doing so may affect the quality of future print jobs.
Insert the new photoconductor unit, and then lock the lower part.
Remove the packing material, and then lock the upper part.
Remove the printhead wiper, and then clean the printhead lenses.
Insert the wiper back into place.
Insert the waste toner bottle until it clicks into place.
Lock the waste toner bottle.
Close the door.