Loading the 2520-sheet tandem tray

1. Pull out the tray.

   Note:  To avoid jams, do not pull out trays while the printer is busy.

   


2. Adjust the guides to match the size of the paper that you are loading.

   


3. Flex, fan, and align the paper edges before loading.

   


4. Load the paper.

   • For one-sided printing, load paper with the printable side faceup.
   • For two-sided printing, load paper with printable side facedown.

   When loading letterhead or prepunched paper, do either of the following:

   For one‑sided printing

   • Load letterhead faceup with the header toward the back of the tray.
   
   • Load prepunched paper faceup with the holes against the left side of the tray.
   

   For two‑sided printing

   • Load letterhead facedown with the header toward the back of the tray.
   
   • Load hole-punched paper facedown with the holes against the right side of the tray.
   

   Notes:

   • Do not slide paper into the tray.
   • Make sure that the stack height is below the maximum paper fill indicator. Overfilling may cause paper jams.
   


5. Insert the tray.

   If necessary, set the paper size and type to match the paper loaded in the tray.

Note:  When a finisher is installed, the images are rotated to 180° when printed.