Skip to Content Information Center
Lexmark CX931

Lexmark CX931

Replacing the transfer module

  1. Turn off the printer.

  2. Unlock the waste toner bottle.

  3. Remove the waste toner bottle.

    Note:  To avoid spilling the toner, place the bottle in an upright position.

  4. Open door A.

    CAUTION—HOT SURFACE:  The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching it.

  5. Unlock, and then pull out the used transfer module.

  6. Remove the used transfer module.

  7. Unpack the new transfer module.

    Warning—Potential Damage:  Do not touch the transfer belt. Doing so may affect the print quality of future print jobs.

  8. Insert the new transfer module until it clicks into place.

  9. Lock the new transfer module, and then close door A.

  10. Insert the waste toner bottle until it clicks into place.

  11. Lock the waste toner bottle.

  12. Turn on the printer.

Was this article helpful?