Loading the 2000-sheet tray

1. Pull out the tray, and then open the tray side door.

   Note:  To avoid jams, do not pull out trays while the printer is busy.

   


2. Adjust the guide at the back of the tray. Do the same at the front of the tray.

   


3. Adjust the lever on the tray side door.

   


4. Flex, fan, and align the paper edges before loading.

   


5. Load the paper stack with the printable side faceup.

   When loading letterhead or prepunched paper, do either of the following:

   For one‑sided printing

   • Load letterhead facedown with the header toward the back of the tray.
   
   • Load prepunched paper facedown with the holes against the left side of the tray.
   

   For two‑sided printing

   • Load letterhead faceup with the header toward the back of the tray.
   
   • Load prepunched paper faceup with the holes against the left side of the tray.
   

   Note:  Make sure that the stack height is below the maximum paper fill indicator. Overfilling may cause paper jams.

   


6. Close the tray side door, and then insert the tray.

   If necessary, set the paper size and type to match the paper loaded in the tray.

Note:  When a finisher is installed, the images are rotated to 180° when printed.