Turn off the printer.
Unplug the power cord from the electrical outlet, and then from the printer.
Open the multipurpose feeder, and then extend the side guides.
Unpack the banner tray, and then remove all the packing material.
Attach the banner tray to the multipurpose feeder.
Push the banner roll catch toward the printer.
Load banner paper into the tray, with the leading edge going under the banner roll catch.
Place the trailing edge of the banner paper on the banner roll catch, and then adjust the side guides.
Connect the power cord to the printer, and then to the electrical outlet.
CAUTION—POTENTIAL INJURY: To avoid the risk of fire or electrical shock, connect the power cord to an appropriately rated and properly grounded electrical outlet that is near the product and easily accessible.
Turn on the printer.