Installing the trifold/Z‑fold finisher

CAUTION—SHOCK HAZARD:  To avoid the risk of electrical shock, if you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

Note:  To install the trifold/Z-fold finisher, you must first install a booklet finisher.



1. Turn off the printer.

   


2. Unplug the power cord from the electrical outlet, and then from the printer.

   


3. Unplug the booklet finisher cables from the printer.

   


4. Open the booklet finisher door, use a flat‑head screwdriver to remove the screw and metal bracket, and then close the door.

   


5. Remove the booklet finisher.

   


6. Unpack the trifold/Z‑fold finisher, and then remove all the packing material.



7. Open the finisher door.

   


8. Remove the trifold bin, attach the screws to the bin, and then insert the bin.

   


9. Using a flat‑head screwdriver, attach the installation bracket for the trifold/Z‑fold finisher, remove the screw, and then close the finisher door.

   


10. Attach the trifold/Z‑fold finisher to the printer.

    


11. Open the trifold/Z-fold finisher door, use the screw to secure the finisher to the printer, and then close the finisher door.

    


12. Remove the wrench, and then adjust the leveling screws to make sure that the front of the finisher has the same height as the printer.

    


13. Adjust the leveling screws to make sure that the rear of the finisher has the same height as the printer.

    


14. Attach the wrench to the trifold/Z-fold finisher.

    


15. Attach the booklet finisher to the trifold/Z-fold finisher.

    


16. Open the booklet finisher door, use the screw to secure the booklet finisher to the trifold/Z-fold finisher, and then close the booklet finisher door.

    


17. Adjust the leveling screws to make sure that all sides of the finisher have the same height.

    


18. Connect the cables to the printer ports and finisher ports.

    


19. Connect the printer and finisher power cords to the printer and the finisher, and then to the electrical outlet.

    
    CAUTION—POTENTIAL INJURY:  To avoid the risk of fire or electrical shock, connect the power cord to an appropriately rated and properly grounded electrical outlet that is near the product and easily accessible.
    

    Note:  If the outlet is 120 or 220 volts, then you may connect both power cords to the same outlet. If the outlet is 100 or 110 volts, then you must connect the power cords to separate outlets.



20. Turn on the printer.

Add the finisher in the print driver to make it available for print jobs. For more information, see Adding available options in the print driver.