Installing the optional 2000‑sheet tray

CAUTION—SHOCK HAZARD:  To avoid the risk of electrical shock, if you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.


1. Turn off the printer.

   


2. Unplug the power cord from the electrical outlet, and then from the printer.

   


3. Unpack the optional tray, and then remove all the packing material.



4. Remove the leveling screw from the left side of the printer.

   Note:  Do not throw away the screw.

   


5. Attach the docking bracket to the printer.

   Note:  Use the docking bracket that came with the optional tray.

   


6. Install the optional tray.

   


7. Connect the tray connector to the printer.

   


8. Adjust the leveling screws to make sure that the tray has the same height with the printer.

   


9. Connect the power cord to the printer, and then to the electrical outlet.

   
   CAUTION—POTENTIAL INJURY:  To avoid the risk of fire or electrical shock, connect the power cord to an appropriately rated and properly grounded electrical outlet that is near the product and easily accessible.



10. Turn on the printer.

Add the tray in the print driver to make it available for print jobs. For more information, see Adding available options in the print driver.