Installing the staple finisher

CAUTION—SHOCK HAZARD:  To avoid the risk of electrical shock, if you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.


1. Turn off the printer.

   


2. Unplug the power cord from the electrical outlet, and then from the printer.

   


3. Remove the standard bin.

   Note:  Do not throw away the bin.

   


4. Open the front door, and then remove the blue knob.

   Note:  Do not throw away the knob.

   


5. Remove the standard bin side cover.

   Note:  Do not throw away the cover.

   


6. Unpack the staple finisher, and then remove all the packing material.



7. Insert the finisher.

   


8. Close the front door.



9. Secure the finisher to the printer.

   Note:  Use the screws that came with the finisher.

   


10. Secure the finisher cable to the printer.

    Note:  Use the clamps that came with the finisher.

    


11. Connect the finisher cable to the printer.

    


12. Connect the power cord to the printer, and then to the electrical outlet.

    
    CAUTION—POTENTIAL INJURY:  To avoid the risk of fire or electrical shock, connect the power cord to an appropriately rated and properly grounded electrical outlet that is near the product and easily accessible.



13. Turn on the printer.

Add the finisher in the print driver to make it available for print jobs. For more information, see Adding available options in the print driver.