Open door A.
CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching it.
Open door A1, and then remove the jammed paper.
Note: Make sure that all paper fragments are removed.
Close door A1, and then close door A.
Lift the paper transport cover, and then remove the jammed paper.
Note: Make sure that all paper fragments are removed.
Close the cover.
Open the booklet finisher door.
Remove the jammed paper from any of the following locations.
- Handle 3A
Note: Make sure to return the handle to its original position.
- Knob 3B
Note: Make sure to return the handle to its original position.
- Handle 3C
Note: Make sure to return the handle to its original position.
- Handle 3D
Note: Make sure to return the handle to its original position.
Pull out the booklet maker.
Turn knob 4A, and then remove the jammed paper.
Push the booklet maker back into place, and then close the finisher door.