Skip to Content Information Center
Lexmark CX943

Lexmark CX943

Not your product?

Paper jam in the staple, hole punch finisher

  1. Open door A.

    CAUTION—HOT SURFACE:  The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching it.

  2. Open door A1, and then remove the jammed paper.

    Note:  Make sure that all paper fragments are removed.

  3. Close door A1, and then close door A.

  4. Lift the paper transport cover F, and then remove the jammed paper.

    Note:  Make sure that all paper fragments are removed.

  5. Close the paper transport cover.

  6. Pull the lever on the staple, hole punch finisher, and then lift the cover.

  7. Remove the jammed paper.

    Note:  Make sure that all paper fragments are removed.

  8. Close the finisher cover.
Was this article helpful?


Related content

Top