Skip to Content Information Center
Lexmark CS943

Lexmark CS943

Not your product?

Replacing the 2000‑sheet tandem tray roller kit

    In handle C

  1. Turn off the printer.

  2. Pull out tray 4, and then pull out tray 3.

  3. Pull out handle C, and then open the inner cover.

  4. Open the roller kit cover.

  5. Remove the used tray roller kit.

    Warning—Potential Damage:  To prevent damage from electrostatic discharge, touch any exposed metal frame of the printer before accessing or touching interior areas of the printer.

  6. Unpack the new tray roller kit.

  7. Insert the new tray roller kit until it clicks into place.

  8. Close the roller kit cover.

  9. Close the inner cover, and then insert handle C.

  10. Insert trays 3 and 4.

  11. Turn on the printer.

    In tray 3

  1. Turn off the printer.

  2. Remove tray 1, and then remove tray 2.

  3. Pull out trays 3 and 4.

  4. Pull out handle C.

  5. Remove the used tray roller kit.

    Warning—Potential Damage:  To prevent damage from electrostatic discharge, touch any exposed metal frame of the printer before accessing or touching interior areas of the printer.

  6. Insert the new tray roller kit until it clicks into place.

  7. Insert handle C.

  8. Insert trays 3 and 4.

  9. Insert trays 1 and 2.

  10. Turn on the printer.
Was this article helpful?


Related content

Top