Open the front door.
Remove the waste toner transfer unit.
Note: To avoid spilling the toner, place the unit in an upright position.
Unlock the used photoconductor unit.
Remove the used photoconductor unit.
Unpack the new photoconductor unit.
Warning—Potential Damage: Do not expose the photoconductor unit to direct light for more than one minute. Extended exposure to light may cause print quality problems.
Warning—Potential Damage: Do not touch the photoconductor drum. Doing so may affect the quality of future print jobs.
Insert the new photoconductor unit until it clicks into place.
Remove the packing material, and then lock the new photoconductor unit.
Remove the printhead wiper, and then clean the printhead lenses.
Put the printhead wiper back into place.
Insert the waste toner transfer unit until it clicks into place, and then lock it.
Close the door.