Open door B.
Open door A.
CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching it.
Remove the right cover.
Remove the waste toner bottle.
Remove the toner cartridges.
Remove the used imaging kit.
Unpack the new imaging kit.
| Black imaging kit | Black and color imaging kit |
|---|
| |
Notes:
- The black imaging kit includes the imaging kit and the black developer unit.
- The black and color imaging kit includes the imaging kit and the black, cyan, magenta, and yellow developer units.
- When replacing the black imaging kit, save the cyan, magenta, and yellow developer units from the used imaging kit.
Remove the packing material.
Note: If you are replacing the black imaging kit, then insert the magenta, cyan, and yellow developer units into the new imaging kit.
Warning—Potential Damage: Do not expose the imaging kit to direct light. Extended exposure to light may cause print quality problems.
Warning—Potential Damage: Do not touch the photoconductor drum. Doing so may affect the quality of future print jobs.
Insert the new imaging kit until it is fully seated.
Insert the toner cartridges until they click into place.
Insert the waste toner bottle until it clicks into place.
Attach the right cover until it clicks into place.
Close door A, and then close door B.