Wireless

Setup Using Mobile App

Configure the Wi‑Fi connection using Lexmark Mobile Assistant.

Setup On Printer Panel

• Choose Network
• Add Wi‑Fi Network
• Network Name
• Network Mode
• Infrastructure
• Wireless Security Mode
• Disabled*
• WEP
• WPA2/WPA - Personal
• WPA2 - Personal

Configure the Wi‑Fi connection using the control panel.

Wi‑Fi Protected Setup

• WPS Auto Detect
• Off
• On*
• Start Push Button Method
• Start PIN Method

Establish a Wi‑Fi network and enable network security.

Notes:

• WPS Auto Detect appears only when the Wireless Security Mode is set to WEP.
• Start Push-Button Method connects the printer to a Wi‑Fi network when buttons on both the printer and the access point (wireless router) are pressed within a given time.
• Start PIN Method connects the printer to a Wi‑Fi network when a PIN on the printer is entered into the wireless settings of the access point.

Network Mode

• BSS Type
• Infrastructure*

Specify the network mode.

Compatibility

• 802.11b/g/n (2.4GHz)*
• 802.11a/b/g/n/ac (2.4GHz/5GHz)
• 802.11a/n/ac (5GHz)

Specify the standard for the Wi‑Fi network.

Note:  802.11a/b/g/n/ac (2.4GHz/5GHz) and 802.11a/n/ac (5GHz) only appear when a Wi‑Fi option is installed.

Wireless Security Mode

• Disabled*
• WEP
• WPA2/WPA-Personal
• WPA2-Personal
• 802.1x - RADIUS

Set the security mode for connecting the printer to Wi‑Fi devices.

WEP Authentication Mode

• Auto*
• Open
• Shared

Set the type of Wireless Encryption Protocol (WEP) for the printer.

Note:  This menu item appears only when the Wireless Security Mode is set to WEP.

Set WEP Key

Specify a WEP password for secure Wi‑Fi connection.

WPA2/WPA Personal

• AES

Enable Wi‑Fi security through Wi-Fi Protected Access (WPA).

Note:  This menu item appears only when the Wireless Security Mode is set to WPA2/WPA-Personal.

Set Pre‑Shared Key

Set the password for secure Wi‑Fi connection.

WPA2-Personal

• AES

Enable Wi‑Fi security through WPA2.

Note:  This menu item appears only when the Wireless Security Mode is set to WPA2-Personal.

802.1x Encryption Mode

• WPA+
• WPA2*

Enable Wi‑Fi security through 802.1x standard.

Note:  This menu item appears only when the Wireless Security Mode is set to 802.1x - RADIUS.

IPv4

• Enable DHCP
• On*
• Off
• Set Static IP Address
• IP Address
• Netmask
• Gateway

Enable and configure IPv4 settings in the printer.

IPv6

• Enable IPv6
• On*
• Off
• Enable DHCPv6
• On
• Off*
• Stateless Address Autoconfiguration
• On*
• Off
• DNS Server Address
• Manually Assigned IPv6 Address
• Manually Assigned IPv6 Router
• Address Prefix
• All IPv6 Addresses
• All IPv6 Router Addresses

Enable and configure IPv6 settings in the printer.

Network Address

• UAA
• LAA

View the network addresses.

PCL SmartSwitch

• Off
• On*

Set the printer to switch automatically to PCL emulation when a print job requires it, regardless of the default printer language.

Note:  If PCL SmartSwitch is off, then the printer does not examine incoming data and uses the default printer language specified in the Setup menu.

PS SmartSwitch

• Off
• On*

Set the printer to switch automatically to PS emulation when a print job requires it, regardless of the default printer language.

Note:  If PS SmartSwitch is off, then the printer does not examine incoming data and uses the default printer language specified in the Setup menu.

Job Buffering

• On
• Off*

Temporarily store print jobs in the hard disk or intelligent storage drive (ISD) before printing.

Note:  This menu item appears only when a hard disk or an ISD is installed.

Mac Binary PS

• Auto*
• On
• Off

Set the printer to process Macintosh binary PostScript print jobs.

Notes:

• On processes raw binary PostScript print jobs.
• Off filters print jobs using the standard protocol.