Skip to Content Information Center
Lexmark XC2335

Lexmark XC2335

Notifications

Menu itemDescription

Note:  An asterisk (*) next to a value indicates the factory default setting.

    ADF Loaded Beep

  • Off
  • On*

Enable a sound when loading paper into the ADF.

    Alarm Control

  • Off
  • Single*
  • Continuous

Set the number of times that the alarm sounds when the printer requires user intervention.

    Supplies

  • Show Supply Estimates
    • Show estimates*
    • Do not show estimates

Show the estimated status of the supplies.

    Supplies

  • Cartridge Alarm
    • Off*
    • Single
    • Continuous

Set the number of times that the alarm sounds when the toner cartridge is low.

    Supplies

  • Custom Supply Notifications

Configure notification settings when the printer requires user intervention.

Note:  This menu item appears only in the Embedded Web Server.

    E‑mail Alerts Setup

  • Primary SMTP Gateway
  • Primary SMTP Gateway Port (25*)
  • Secondary SMTP Gateway
  • Secondary SMTP Gateway Port (25*)
  • SMTP Timeout (30 seconds*)
  • Reply Address
  • Always use SMTP default Reply Address (Off*)
  • Use SSL/TLS (Disabled*)
  • Require Trusted Certificate (On*)
  • SMTP Server Authentication (No authentication required*)
  • Device‑Initiated E‑mail (None*)
  • User‑Initiated E‑mail (None*)
  • Use Active Directory Device Credentials (Off*)
  • Device Userid
  • Device Password
  • Kerberos 5 REALM
  • NTLM Domain
  • Disable “SMTP server not set up” error (Off*)

Configure the printer to send e‑mail alerts to a list of contacts when the printer requires user intervention.

    E‑mail Alerts Setup

  • Setup E‑mail Lists and Alerts
    • E‑mail List 1
    • E‑mail List 2
    • Subject Text
    • E‑mail Events

Specify the e‑mail addresses and enable the e‑mail alert events.

Note:  This menu item appears only in the Embedded Web Server.

    Error Prevention

  • Jam Assist
    • Off
    • On*

Set the printer to flush automatically blank pages or pages with partial prints after a jammed page is cleared.

    Error Prevention

  • Auto Continue
    • Enabled
    • 5–255 (5*)

Let the printer to continue processing or printing a job automatically after clearing certain attendance conditions.

    Error Prevention

  • Auto Reboot
    • Auto Reboot
      • Reboot when idle
      • Reboot always*
      • Reboot never

Set the printer to restart when an error occurs.

    Error Prevention

  • Auto Reboot
    • Max Auto Reboots
      • 1–20 (2*)

Set the number of automatic reboots that the printer can perform.

    Error Prevention

  • Auto Reboot
    • Auto Reboot Window
      • 1–525600 (720*)

Set the number of seconds before the printer performs an automatic reboot.

    Error Prevention

  • Auto Reboot
    • Auto Reboot Counter

Show a read‑only information of the reboot counter.

    Error Prevention

  • Auto Reboot
    • Reset Auto Reboot Counter
      • Cancel
      • Continue

Reset the values of the Auto Reboot Counter.

    Error Prevention

  • Display Short Paper Error
    • On
    • Auto‑clear*

Set the printer to show a message when a short paper error occurs.

Note:  Short paper refers to the size of the paper loaded.

    Error Prevention

  • Page Protect
    • Off*
    • On

Set the printer to process the entire page into the memory before printing it.

    Jam Content Recovery

  • Jam Recovery
    • Off
    • On
    • Auto*

Set the printer to reprint jammed pages.

    Jam Content Recovery

  • Scanner Jam Recovery
    • Job level
    • Page level*

Specify how to restart a scan job after resolving a paper jam.

Was this article helpful?
Top