Skip to Content Information Center
Lexmark CX725

Lexmark CX725

Not your product?

EP gear box removal

  1. Remove the left cover. See Left cover removal.

  2. Route the cable out of the guides (A).

  3. Disconnect the three motor cables (B).

  4. Route the motor cables out of the guides (C) from under the gear box.

  5. Remove the two screws (D) from under the gear box.

  6. Remove the two screws (E) from the top-left and top-right corners of the EP drive, and then remove the gear box.
Was this article helpful?


Related content

Top